• RAP
• MAP
• Flex on MESH

2.Describe the considerations for a MESH deployment

• Hop count
• Backhaul caveats
• AP authorization
• Outdoor RF considerations
• VLAN transparent bridging

3.Describe the convergence of a MESH network

• Cisco AWPP
• Bridge group names
• Parent selection
• Fast convergence modes
• Re-convergence

4.Implement workgroup bridge

• Proprietary
  Reliable multicast
  Roaming
• Universal

5.Describe the passive client feature

• No IP address learning
• Third party WGB support

• Configurations
• DSCP/IP precedence to 802.1p mapping
• Voice VLAN
• Trust boundaries

2.Describe and implement the appropriate wireless QoS deployment schemes

• 802.11e / WMM
• Mapping-wired to wireless
• Alloy QOS

3.Configure infrastructure QoS for wireless clients

• CAC
• TSPEC
• EDCA parameters
• Queues
• Bandwidth control and override

4.Implement AVC

• Configure AVC
  Profiles
  Netflow/NBAR2
• Monitor AVC
  Controller
  PI

• LAG vs Port based
• Backup primary and backup secondary outside of mobility group
• Anchor controller redundancy

2.Configure high availability for the AP

• AP fallback
• AP prioritization
• Legacy primary ,secondary, and tertiary

3.Configure high availability for the Controller

• AireOS
  Stateful switch over (SSO)
• IOS-XE
  Stateful switch over (SSO)
  Stacking

• High client count (high capacity)
• High AP count (high density)

2.Implement RXSOP
3.Implement enhanced roaming
4.Implement AP Groups

• RF profiles

5.Implement interface groups
6.Implement client limits

• Per Radio
• Per WLAN
• Per Interface

• Context aware
• Adaptive wireless IPS
• Analysis
• CleanAir
• Scalability

2.Describe location techniques

• Angulation
• Cell of origin
• TDoa and ToA lateration
• RSS lateration
• Pattern recognition
• RF Fingerprinting
• Compare probe based location vs data frame based location
• Bluetooth Low Energy (BLE)

3.Identify the relevant parameters required Initialize MSE for network operations
4.Implement base location services

• Calibration procedure
  PI based
  Ekahau based
• Complex environments
  Mixed use environments
  Complex RF environments
  Small areas ( i.e new presence capabilities)
  Multi-floor facilities
  Recalibration
• NMSP
• Synchronization
• History parameters
• Tracking parameters
  Active RFID tag
  WiFi-Devices
  Active Interferes
  Rogue devices

5.Implement advanced location services

• Analytics
  Location (zone based)
  Presence (site based)
• Visitor connect
• Describe AppEngage
• Facebook for Wi-Fi

6.Integrate MSE with PI

• Identify the relevant components to integrate the MSE with PI
• Identify the relevant steps to Integrate MSE with PI
• Identify the relevant steps required to Maintain MSE

• PIM
• Cisco Group Management Protocol
• IGMP snooping
• RP

2.Describe implications for multicast in 802.11

• Highest mandatory data rate
• Unicast and multicast modes
• Roaming
• Controllers having same CAPWAP multicast group
• Video stream (reliable multicast)
• mDNS

3.Configure multicast in a wireless network

• Infrastructure multicast group
• IGMP snooping on the controller
• Video stream (reliable multicast)
• Switch peer group / Mobility group multicast

4.Configure mDNS

• mDNS gateway
• LSS
• Service advertisement
• MAC priority
• AAA override
• ISE portal
• Static advertisements on converged access
• mDNS profiling

• Local switching vs Central switching
• Local Auth vs Central Auth
• Connected mode vs Standalone mode

2.Describe and implement the capabilities of a FlexConnect group

• VLAN mapping
• ACLs
• AP Image upgrade
• Authentication and key management
• Central vs Local DHCP

3.Describe the impact of FlexConnect architecture on roaming

• ACLs
• Authentication
• Key management
• Real time application

4.Describe and implement Office Extend operation

• Configuration
  Controller
  AP
• Split tunneling for printing and general traffic

• AP group VLANS
• Identity based networking

2.Minimize inter controller roaming
3.Describe mobility control plane architectures
4.Describe mobility tunneling process

• Formation
  Ability to identify the tunnels created
• Tear down
• Messaging
• Handoff types

5.Implementing client mobility

• Switch Peer Group (SPG)
• Mobility groups
• Mobility lists
• Anchoring
• Virtual interface continuity
• Mobility Optimization (11k/11v)
• Verify resulting mobility tunneling structure